![]() |
![]() |
নির্বাচিত পোস্ট | লগইন | রেজিস্ট্রেশন করুন | রিফ্রেস |
আমার প্রিন্টারটি Canon ip3680, এটাতে এখন প্রিন্ট দিতে গেলে ink absorber full উঠে। সমস্যাটির সমধান কারো জানা থাকলে শেয়ার করবেন প্লিজ
২| ২৮ শে ফেব্রুয়ারি, ২০১৪ রাত ১০:৩৬
ইকরাম বাপ্পী বলেছেন: Ki ek problem dilen ek line er r tar solution dekhen kotto boro…….
৩| ১৮ ই এপ্রিল, ২০১৪ সকাল ১১:২৮
আদরসারািদন বলেছেন: যদিও অনেক লম্বা উত্তর তার পরেও কাজে আসবে। ধন্যবাদ আপনাকে ভাই।
©somewhere in net ltd.
১|
২৮ শে ফেব্রুয়ারি, ২০১৪ রাত ৮:২১
মাহমুদুর রহমান সুজন বলেছেন: আপনার সমস্যাটি হচ্ছে ; প্রিন্টারের বর্জ কালি জমে গেছে waste ink (Step 1
Fill a large bowl with warm, soapy water and set it aside. Put on the rubber gloves.
Step 2
Open the ink cartridge compartment. Depending on your Canon printer model, this compartment may be in the front or the back of the machine.
Related Reading: Instructions on How to Refill an Ink Cartridge on a Canon Pixma
Step 3
Wait for the ink cartridges to move all the way over, then disconnect the printer's power cord.
Step 4
Look for a black rubber frame under the ink cartridge assembly. This contains the ink absorbing pads.
Step 5
Pull the rubber frame out of the printer and remove the ink absorbing pads. The number of pads varies by model.
Step 6
Place the pads in the bowl. Rub and squeeze them to remove the ink. When the water becomes opaque with ink, discard the solution and refill the bowl with more warm, soapy water. Continue this procedure until all ink is removed from the pads.
Step 7
Squeeze the excess water from the pads and place them on a stack of three or four paper towels to dry.
Step 8
Check the pads every hour to determine if they are dry. If the paper towels become saturated, change them out.
Step 9
Place the pads back in the rubber frame when they are completely dry. Reinstall the frame in the printer.
Step 10
Press and hold the "Power" button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the "Power" button again. This resets the printer's internal memory and overrides the "Ink Absorber Full" error code.
স্টেপ গুলো অনুসরন করুন
এক কথায় প্রিন্টারের একটা যায়গা আছে যেখানে অব্যবহিৃত কালি জমা হয় ।
যায়গাটি হল ink cartige এসে যেখানে থামে । ঐযায়গা টা একটা পঞ্চ দিয়ে মুছে পরিষ্কার করুন।