Interny Weaving

১৭ ই অক্টোবর, ২০১৬ দুপুর ২:২৩

INDUSTRIAL ATTACHMENT
AT
NOMAN TEXTILE MILLS LIMITED
(An Enterprise of Noman Group )

This Report Presented in Partial Fulfillment of the Requirements for the Degree of
B Bachelor of Science in Textile Engineering
SUPERVISED BY
Professor H M Nafiz Jahid
Head , Department of Textile Engineer
UNIVERSITY OF SAUTH ASIA
PREPARED BY
Md . Motiur Rahman
Id : 151-0316 -020
Department of Textile Engineering
DURATION: FEBRUARY 2016 TO MARCH 2016
ACKNOWLEDGEMENT
First we express our heartiest gratitude and gratefulness to The Almighty God for his divine
blessings which makes us possible to complete this industrial attachment report successfully.
We fell grateful and wish our profound indebtedness to Professor H M Nafiz Jahid,
and Head, Department of Textile Engineering, UNIVERSITY OF SAUTH ASIA
. Deep
Knowledge & keen interest of our supervisor in the field of Textile Technology especially, in
Weaving Technology influenced us to transmit this report. His endless patience, scholarly,
guidance, continual encouragement, constant and energetic, supervision, constructive criticism,
valuable advices reading many inferior draft and correcting them at all stage have made it
possible to complete this report.
We are thankful to our Supervisor in Industry Mr.Babu Ahmed , AGM, Noman Textile Mills
Limited , for his well organized direction and expertise which helped to match the practical facts
with the theoretical knowledge.
We are also grateful to Md. Firoz Ahmed,officer R&D department.. And also grateful to
Md. Manik Choudhuri,manger grey stock.
Finally, we must acknowledge our Parents with due respect for their constant support, patients
and believe on our ability which drives us in the successful completion of this report.
ABSTRACT
This report is titled “Report on Industrial Attachment at Noman Textile Mills Limited”. By
achieving practical knowledge from the industrial attachment it is possible to apply the
theoretical knowledge in the technical field.
For any technical education, practical experience is almost equally necessary in association with
the theoretical knowledge. The industrial attachment is the most effective process of achieving
the practical experiences. It provides us sufficient practical knowledge about Production
Management, Productivity, Evaluation, Work Study, Efficiency, Industrial Management,
Production Planning & Controlling, Utilities and Maintenance of Machineries and their
Operation Techniques etc.
Noman Textile Mills Limited is a modern textile industry based on knit garments production..
Our approach was to know and work with all the parameters of each section and practice with
technical experts. As our academic advance study was in Weaving Technology our emphasis was
in understanding and learning of Weaving.
Industrial attachment is an essential part of four years B.Sc. in Textile Engineering course of
Daffodil International University. We had the opportunity to perform the industrial attachment
with Noman Textile Mills Limited During 2 Months long attachment, we studied the Man,
Machine, Material and Planning, Grey Fabric Inspection, Finished Fabric Inspection,
According to our studies in the whole chain of the factory we have prepared the following report
and would like to present as our internship report. B.Sc. in Textile Engineering is the
combination of theoretical knowledge and the practical experiences. The main objective of this
training is to comprehend our theoretical knowledge along with the practical knowledge. It also
enabled us to orient ourselves with the practical environment which is our place of future work.









INDEX

Chapter - 01 Introduction 3- 4
Chapter – 02 Project Description 5-9
Chapter – 03 Project Location 10-13
Chapter – 04 Management System 14-17
Chapter – 05 Layout Plan 18-26
Chapter – 06 Raw Materials 27-29
Chapter – 07 Production Planning & Sequence
of Operation 30-31
Chapter – 08 Warping Department 32-38
Chapter – 09 Sizing Department 39-45
Chapter – 10 Drawing-in, Denting &
Knotting Department 46-50
Chapter – 11 Weaving Department 51-60
Chapter – 12 Testing Lab Section in Noman Group 61-65
Chapter – 13 Inspection Department 66-70
Chapter – 14 Maintenance Department 71-73
Chapter – 15 Store & Inventory Control 74-76
Chapter – 16 Social and Environmental Compliance 77-79
Chapter – 17 Discussion 80-81
Chapter - 18 Conclusion 82-83









INDEX
Topics Page no.
INTRODUCTION
W E L C O M E
Chapter - 01
INTRODUCTION
For any technical education, practical experience is almost equal important in association
with the theoretical knowledge. By means of practical knowledge it’s not possible to
apply the theoretical knowledge in the practical field. Industrial attachment is the first
step to professional life of student, especially of technical side. It’s an indispensable part
of study a practically running processing technology of an industrial unit for a student.

University education provides us vast theoretical knowledge as well as more practical
attachment, in despite of all these industrial attachment helps us to be familiar with
technical support of modern machinery, skillness about various processing stages.
It also provides us sufficient practical knowledge about production management, work
study, efficiency, industrial management, purchasing, utility and maintenance of
machineries and their operation techniques etc. the above mentioned cannot be achieved
successfully by means of theoretical knowledge only. This is why it should be
accomplished with practical knowledge in which it is based on. Industrial attachment
makes us reliable to be accustomed with the industrial atmosphere and improve courage
and inspiration to take self responsibility.
We got an opportunity to complete eight weeks long industrial training in Noman Textile
Mill Ltd (A company of Noman Group), which is a 100% export oriented Weaving
Industry. It has well planned & equipped manufacturing.


Project Description
Chapter - 02
2.1 Project Description
Noman Textile Mills Ltd. is company of Noman Group. Noman Group is the
biggest textile group in Bangladesh. About 35 textile mills have this Noman
Group. Some of textile name is given below:


০ টি +০/-০